Seals

IS8100si

A heavy duty, automatic door bottom seal which is fully-mortised into the bottom edge of single action doors. The seal has a spring loaded mechanism which lifts the seal clear of the floor as soon as the door is opened. Pressure against the door jamb on the adjustable brass strike button operates the seal automatically.

The seal is mounted into a 43mm deep x 21mm wide machined groove along the underside of the door. The seal is screw-fixed into position through the mounting flanges. Aesthetic, rigid nylon push-fit end plates (or screw-fixed cast aluminium end plates) ensure longevity of the seal mechanism.

The seal contains a high efficiency mechanism to assist with the closing force requirements detailed in AS1428/1 (Design for Access and Mobility).

Features
Download

Australia Made

Ensuring the highest standards of production, this product is proudly manufactured in Australia.

Product Features

Ambient Temperature Smoke

Seals for this designation are designed to control smoke at ambient temperature conditions.

Anti-microbial version available

SteriTouch® antimicrobial seals are designed to safely reduce the growth of harmful organisms such as bacteria, mould and fungi.

Designed for access and mobility

When installed as per our instructions, these seals offer very low frictional forces, thereby eliminating any increase to the opening and closing forces of the door – an important consideration when meeting the requirements of AS1428/1.

Energy Efficient

Reducing air movement within buildings assists in improving the overall energy efficiency of the building.

Medium Temperature Smoke 200C

Designed to contain smoke at 200 degrees C for 30 minutes.

Medium Temperature Smoke C3.4

Seals for this designation are designed to conform to the NCC Specification C3.4 for ‘Smoke Doors’

Proprietary Fire Doors

Fire tests to AS1530/4 have been conducted on one or more proprietary fire door constructions to show that the addition of these seals will not affect the already established fire resistance levels of the fire doors. Strict compliance with AS1905/1 requires each door type to be tested with each item of hardware. For each project, please check with the respective fire door manufacturer to verify that their door construction has the relevant listing for Kilargo Integrity seals.

Proprietary Smoke Doors

Seals for this designation have been tested in accordance with AS1530/7 for smoke leakage, providing ambient or medium temperature leakage rates across various pressures.

Sound Containments

Testing for door assemblies incorporating these seals has been conducted to AS1191 and/or ISO140 Part 3/ISO10140.2.

Product Approvals

Fire tested in accordance with
AS1530 Part 4, AS1905 Part 1
Certifications
GVYI.R26629, GVWZ.R26629, GVWZ7.R26629
Conforms with
BCA Specification C3.4
smoke sealing requirements
Acoustically tested in accordance with
AS1191, IS0140.3, ISO10140-2
Durability tests demonstrating over
1,000,000
open and close cycles

Product Specifications

Gap Size
Min. 3mm / max. 15mm
Standard Lengths
450mm, 610mm, 820mm, 920mm, 1070mm, 1220mm, 1500mm (*Longer length available to special order up to a maximum 1600mm)
Maximum Allowable Cut-back SIzes
450mm seal cuts to 275mm, 610mm seal cuts to 450mm, 820mm seal cuts to 610mm, 920mm seal cuts to 610mm, 1070mm seal cuts to 920mm, 1220mm seal cuts to 1070mm, 1500mm seal cuts to 1220mm (*Seals can be cut on site for exact dimension)
Standard Colours
Silver anodised aluminium with grey end plates (or cast aluminium end plates) and grey silicone gasket (Black end plates (or black cast aluminium end plates) and black silicone gasket also available upon request)

Download Fact Sheet

Download Installation Sheet

Download DWG