The IS5175A seal is designed with a 45ยบ angle aluminium carrier and is used to prevent draught and dust penetration around the perimeter of roller and tilt-up doors.
The angled aluminium carriers can be fitted with either 13mm, 19mm or 25mm black nylon brush.
(50mm brush is also available upon request).
Gap size
- IS5175A: Min. 15mm / max. 21mm (with 19mm brush insert)
(Gap size dependent upon brush size utilised)
Standard lengths
- 1000mm
- 2250mm
- Also available in: 250mm increments from 1000mm to 3000mm (Brush lengths to be confirmed upon placement of order.)
Standard colours
- Silver anodised aluminium carrier with black nylon brush
Fixing
- Brush seals (within carriers) can be screw fixed or self-adhered to the desired surface
- Fixing screws and aggressive backing tape are supplied
Approval/s
- Durability tests demonstrating over 100,000 open and close cycles
