FDBU60
Retrofit intumescent fire door bottom upgrade seals.
Application:
Used to upgrade existing fire doors where door bottom gaps exceed the allowable 10mm as per AS1905/1.
Key Features:
- Can provide up to 2 hours fire resistance when fitted to the bottom of proprietary fire doors
- Non-compliant fire doors can be salvaged
- Avoids expensive door build-ups or door replacements
- Cost-effective solution
- Easy retro-fit installation
- No need to remove the door during installation
Featured
Downloads
Product Features
Medium Temperature Smoke C3.4
Seals for this designation are designed to conform to the NCC Specification C3.4 for ‘Smoke Doors’
Product Approvals
Fully tested to
AS1530 Part 4
for up to 2 hours on proprietary fire door assemblies in accordance with AS1905 Part 1 Conforms with
NCC Specification C3.4
smoke sealing requirements NB:
Check with your door manufacturer for approvals. Product Specifications
Materials
These products consist of an anodised aluminium profile, flame retardant smoke, draught and light excluding silicone gasket and integral high performance intumescent fire seals. Gap Size
- FDBU60-35 Can seal gaps up to 60mm maximum under nom. 35mm proprietary fire doors.
- FDBU60-45 Can seal gaps up to 60mm maximum under nom. 45mm proprietary fire doors.
Standard Lengths
820mm, 920mm, 1220mm Finish
Clear Anodised (Silver) with grey gaskets. Fixing
The FDBU60 is supplied with pre-drilled slotted holes and screws for easy application onto the bottom of door leafs. (Aluminium screw-fixed end plates are also available separately).